[developers] ACE on Ubuntu on Windows

[Woodley Packard]

Hi Guy,

You are on the right track with the two lines in the makefile commented out.

Something has perhaps changed since it has been built in that mode.  Try adding this to the top of itsdb.c:

#define capi_printf printf

and running "make" again?
Woodley



> On Nov 16, 2016, at 8:47 AM, Guy Emerson <gete2 at cam.ac.uk> wrote:
> 
> I used the precompiled binary and grammar - I didn't realise that librepp was only for compiling from source.
> 
> Running gdb, I get:
> 
> Program received signal SIGSEGV, Segmentation fault.
> 0x00007fffdec22300 in ?? ()
> (gdb) backtrace
> #0  0x00007fffdec22300 in ?? ()
> #1  0x000000000046290a in visit_lexicon (stem=<optimized out>, visitor=0x7fffdec22300) at lexicon.c:137
> #2  0x00000000004845fc in lexical_lookup (tc=0x7f27168d0000) at morpho.c:283
> #3  0x00000000004df9b1 in lexical_lookup_into_chart (token_chart=0x7f27168d0000) at lexical-parse.c:64
> #4  0x00000000004c0ff8 in parse_with_token_chart (token_chart=0x7f27168d0000, start=46875) at parse.c:481
> #5  0x00000000004c37e1 in parse_line1 (line=0x7fffdec22540 "Hello") at parse.c:743
> #6  0x00000000004c3936 in parse_line (line=0x6005692cfc ",-i\005`") at parse.c:768
> #7  0x0000000000516677 in main_input_loop (fin=0x7f271708f640 <_IO_2_1_stdin_>) at main.c:443
> #8  0x0000000000517561 in main (argc=4, argv=0x7fffdec276c8) at main.c:653
> 
> 
> If I try to compile the ERG image (using the precompiled binary), I also get a seg fault:
> 
> Program received signal SIGSEGV, Segmentation fault.
> 0x00007fffcea82cd8 in ?? ()
> (gdb) backtrace
> #0  0x00007fffcea82cd8 in ?? ()
> #1  0x00000000004ccfbe in iterate_conf_list (key=<optimized out>, callback=0x7fffcea82cd8) at conf.c:534
> #2  0x00000000004ce9aa in load_preprocessor () at preprocessor.c:58
> #3  0x0000000000472772 in load_grammar (path=0x7fffcea831fc "/home/Guy/delphin/erg/trunk/ace/config.tdl") at tdl.c:1660
> #4  0x0000000000515dbe in initialize_engine () at main.c:523
> #5  0x000000000051735d in main (argc=6, argv=0x7fffcea82fb8) at main.c:620
> 
> 
> If I try to compile ACE from source, without any changes, there is an error that itsdb.h is not found.
> 
> If I try to compile ACE after commenting out the two lines in the Makefile for itsdb, there is an error that capi_printf is not defined in itsdb.o.
> 
> If I also remove itsdb.o from the Makefile, many things are undefined.
> 
> 
> 
> As I'm not a C developer, I have very little sense about how easy this would be to debug or to fix...  I'm quite happy to be told this is not worth the effort!
> 
> 
> 
> 2016-11-15 17:12 GMT+00:00 Woodley Packard <sweaglesw at sweaglesw.org>:
>> Out of curiousity, Guy, were you able to use the precompiled binary for ACE or did you have to compile your own?  I wouldn’t have thought you would need to install the librepp and boost dependencies if using the binaries.  It looks like you are using the precompiled ERG image though.  You could be getting a crash if you are using a stock 0.9.24 grammar image with SVN trunk ACE source code.  On the off chance that you are doing that, please try compiling the ERG image with the same ACE binary you are using.  It *might* be helpful to recompile the ERG image anyway.
>> 
>> Regards,
>> -Woodley
>> 
>> > On Nov 15, 2016, at 6:33 AM, Guy Emerson <gete2 at cam.ac.uk> wrote:
>> >
>> > I am trying to run ACE on Windows 10's new Linux Subsystem.  I can run ACE with the ERG, but whatever input I give, I get the message "ERROR: DEADLY SIGNAL!"
>> >
>> > It looks like it finishes the token mapping, and fails when applying a syntactic rule.  Verbose output is below.
>> >
>> > I've already installed repp-0.2.2 (which required me to also install libboost), and I've set the TMPDIR environment variable, as suggested on the ACE homepage.
>> >
>> > Any ideas on what else I would need to do?  Could there be other dependencies I need to install?
>> >
>> > Best,
>> > Guy
>> >
>> >
>> >
>> > ./ace -g erg-1214-x86-64-0.9.24.dat -1Tf -vvv
>> > NOTE: loading frozen grammar ERG (1214)
>> > NOTE: semantic index hash contains 28857 entries in 65536 slots
>> > NOTE: max-ent model hash contains 659414 entries in 1048576 slots
>> > NOTE: 9280 types, 38259 lexemes, 293 rules, 47 orules, 101 instances, 48101 strings, 216 features
>> > permanent RAM: 4k
>> >
>> > Hello
>> > Hello/UH
>> > token #12 le 0x7f07295d7fcc vtx [0-1] char [0-5] string 'hello' dag #D[token +FORM: #D["hello"] +FROM: <1>= #D["0"] +TO: #D["5"] +ID: #D[*diff-list* LIST: #D[*list*] LAST: #D[*list*] ] +TNT: #D[null_tnt +TAGS: #D[*null*] +PRBS: #D[*null*] +MAIN: #D[tnt_main +TAG: #D["UH"] +PRB: #D["1.0"] ] ] +CLASS: #D[alphabetic +INITIAL: #D[+] +CASE: #D[capitalized+lower] ] +TRAIT: #D[token_trait +UW: #D[-] +IT: #D[italics] +LB: #D[bracket_null] +RB: #D[bracket_null] +HD: #D[token_head +LL: #D[ctype -CTYPE-: #D[string] ] +TG: #D[string] +TI: <1> ] ] +PRED: #D[predsort] +CARG: #D["Hello"] +TICK: #D[bool] ]
>> > token #13 le 0x7f07295d87e0 vtx [0-1] char [0-5] string 'hello' dag #D[token +FORM: #D["hello"] +FROM: <1>= #D["0"] +TO: #D["5"] +ID: #D[*diff-list* LIST: #D[*list*] LAST: #D[*list*] ] +TNT: #D[null_tnt +TAGS: #D[*null*] +PRBS: #D[*null*] +MAIN: #D[tnt_main +TAG: #D[string] +PRB: #D[string] ] ] +CLASS: #D[bridge_class] +TRAIT: #D[token_trait +UW: #D[+] +IT: #D[italics] +LB: #D[bracket_null] +RB: #D[bracket_null] +HD: #D[token_head +LL: #D[ctype -CTYPE-: #D[string] ] +TG: #D[string] +TI: <1> ] ] +PRED: #D["_hello_u_bridge_rel"] +CARG: #D["Hello"] +TICK: #D[bool] ]
>> > finished token mapping
>> > hello -> hello [2 ways]
>> >
>> >          non_third_sg_fin_v_rbst
>> > hello -> hello [2 ways]
>> >
>> >          non_third_sg_fin_v_rbst
>> > ERROR: DEADLY SIGNAL! sent = `Hello'
> 
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.delph-in.net/archives/developers/attachments/20161116/46683073/attachment.html>